When you discover that your fireplace doesn’t work, it can be frustrating or even frightening. You want to get your gas fireplace repaired as quickly as possible, especially as the coldest months are approaching.
Why did my gas fireplace stop working?
Gas fireplaces can be reliable, but they do occasionally have problems. Learn how to troubleshoot a problem so you can get your gas fire quickly repaired.
Here are the most common reasons that gas fireplaces fail to work. You can try to fix it yourself at home or call a professional.
Old Batteries.
Some gas fireplaces require batteries to ignite the pilot light. Test the batteries in your fireplace remote or receiver to see if you’re having trouble starting your fireplace. It may be as simple as replacing the batteries to get your fireplace up and running again.
Closed Gas Valves.
Check the gas valve in your fireplace to make sure it is in the “on position”. It is this valve that fills your fireplace with gas when you use it and prevents gas from entering your home when not in use. This valve will prevent your fireplace from producing hot air if it is closed.
Blown Out Pilot Light.
Your fireplace will not heat your home if the pilot light is blown out by an interruption in the gas supply. If you are doing a DIY fix, be sure to read all instructions from the manufacturer and your home manual before relighting the pilot light. Check to see if the orifices of your pilot light are free from debris and clean.
Propane Tank & Natural Gas Line Problems.
Check that the top knob of your propane tank is in the “on position” if your fireplace relies on it. If your gas fireplace relies on propane, make sure that the knob at the top of your tank is in the “on” position. Call your propane supplier if the tank is turned on but no gas is flowing.
Thermocouple & Thermopile Issues.
The thermocouples and the thermopiles may sound complicated, but they’re not as complex as they seem.
A thermocouple, a small metal probe, controls the gas valve for your fireplace. It checks the temperature in the area and ignites the gas if needed. Check to make sure that your thermocouple works properly. Make sure it’s screwed down tightly and is positioned correctly.
The thermopile, which is a sensor of temperature, is similar to the thermocouple. It is, however, connected to an electrical voltage rather than a gas.
Call a professional if you suspect that something is wrong with the thermopile or the thermocouple.
Thermostat Problems.
Your gas fireplace will not know when to start if your thermostat is set below the temperature of the room. If your gas fireplace doesn’t start roaring, check your thermostat settings.
It’s time to contact a professional if none of the DIY fixes work.
How much does it cost to repair a gas fireplace?
Gas fireplace repair in omaha can be expensive depending on your location and the type of problem. You can expect to pay between $175 and 916 for repairing a gas unit in most cases.
Most professionals will repair your pilot light for around $150 on average.
You can expect to spend between $150 and 250 on a thermocouple replacement or thermopile.
Avoiding gas fireplace repair needs before they happen.
Regular maintenance can prevent problems with your gas fireplace that will require major repairs. Spending a little money and time now can save you a lot of trouble later.
What is the maintenance required for a gas fireplace?
As part of your annual maintenance program, gas fireplaces should be checked by a professional. Professionals can identify components that are wearing out and help prevent them from becoming dangerous safety hazards.
How often should I service my gas fireplace?
As part of your annual maintenance program, gas fireplaces should be serviced every year. They should also be serviced whenever there are any problems that need professional help. Even fireplaces that are seldom used should be checked at least every three years to avoid any potential hazards.
What to look for when choosing a gas fireplace service and repair company.
You should only use a service or repair company that you trust. One unreliable contractor can cause lengthy delays, unexpected expenses, and dangerous safety hazards.
Before they begin work on your fireplace, a reputable shop should provide you with a quote. You can avoid paying a lot of money for small jobs.
